Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!rutgers!gatech!udel!burdvax!devonst
From: devonst@burdvax.PRC.Unisys.COM (Tom Albrecht)
Newsgroups: comp.sys.cbm
Subject: Re: Multiplan (From HES)
Message-ID: <4470@burdvax.PRC.Unisys.COM>
Date: Mon, 28-Sep-87 09:29:51 EDT
Article-I.D.: burdvax.4470
Posted: Mon Sep 28 09:29:51 1987
Date-Received: Tue, 29-Sep-87 06:08:17 EDT
References: <14765@amdahl.amdahl.com> <2604@ncrcae.Columbia.NCR.COM>
Sender: news@burdvax.PRC.Unisys.COM
Reply-To: devonst@burdvax.PRC.Unisys.COM (Tom Albrecht)
Organization: Unisys - CG/Devon
Lines: 12
Keywords: multiplan microsoft c64 hes

In article <2604@ncrcae.Columbia.NCR.COM> ralph@ncrcae.UUCP (Ralph Hightower) writes:
>I use HES Multiplan and have no problems with it.  It is a pain to use if
>you have only one drive, because if you are doing any saves/loads, you have
>to keep inserting/removing your disk that your spreadsheet is on with the
>Multiplan library disk.  ...

If you have a single drive you can copy one of the Multiplan files onto a
disk with your spreadsheets.  This way you can avoid having to swap disks to 
do other functions.

--
Tom Albrecht