Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!rutgers!mtune!whuts!2212msr
From: 2212msr@whuts.UUCP (ROBIN)
Newsgroups: comp.sys.ibm.pc
Subject: Adding 3 1/2" drive to IBM AT
Message-ID: <2889@whuts.UUCP>
Date: Fri, 18-Sep-87 10:21:54 EDT
Article-I.D.: whuts.2889
Posted: Fri Sep 18 10:21:54 1987
Date-Received: Sun, 20-Sep-87 05:16:55 EDT
Organization: AT&T Bell Laboratories
Lines: 15
Keywords: IBM AT;3 1/2"

I currently own an 'old' IBM AT (del 8/84 as 6Mhz machine) which is equipped
with a Seagate 4051 HD and TWO 5 1/4"-1.2M floppy drives.  For reasons I
won't go into here, I need to add 3 1/2" drive capability w/o removing
either of the 5 1/4" drives.  My thoughts run toward an A/B switch
on the3 drive cable, such that in one psitiom I have A= 5 1/4" and in
the other A= 3 1/2".

Any thoughts, ideas, sources for 34 line A/B switches, etc. would be greatly
appreciated.

Max S. Robin
AT&T Bell Laboratories
Whippany, NJ 07981
email:whuts!2212msr
voice:201-386-6865