Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!uunet!husc6!hao!oddjob!gargoyle!ihnp4!chinet!randy From: randy@chinet.UUCP (Randy Suess) Newsgroups: comp.sys.ibm.pc,comp.arch,comp.unix.wizards Subject: Re: 386 unix (was Re: 386 demand paged virtual memory) Message-ID: <1595@chinet.UUCP> Date: Wed, 31-Dec-69 18:59:59 EDT Article-I.D.: chinet.1595 Posted: Wed Dec 31 18:59:59 1969 Date-Received: Sun, 20-Sep-87 15:51:54 EDT References: <125@snark.UUCP> <299@nuchat.UUCP> <358@netxcom.UUCP> <306@nuchat.UUCP> <306@kksys.UUCP> <1337@van-bc.UUCP> <1583@chinet.UUCP> <711@ima.ISC.COM> Reply-To: randy@chinet.UUCP (Randy Suess) Organization: Chinet - Public Access Unix Lines: 36 Summary: oops Xref: mnetor comp.sys.ibm.pc:8003 comp.arch:2251 comp.unix.wizards:4346 >In article <1583@chinet.UUCP> I write: >> From what I understand, Bell's UNIX is re-packaged Microport >> UNIX. > Well, seems I understand wrong. I got this via email today. ----- From: Richard Morris I have recently spoken to the folks at Bell Technologies concerning their UNIX System V/386. It was created by AT&T, Intel, and Interactive Systems, and is not derived from Microport who has yet to release their UNIX for the 386. Bell Technologies System V/386 has recently undergone AT&T certification. Hope this is of interest to you. If you need additional information about the Bell Technologies products, you can contact Dimitri Rotow at Bell Tech. (415) 659-9097. They are very nice folks to work with. Could you please post this information on the Usenet. I am currently on a DEC-20 with a BBOARD system, and I haven't yet figured out how to post only reply to posted items. Thank you. Richard Morris ------- -- that's the biz, sweetheart..... Randy Suess ..!ihnp4!chinet!randy