Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!think!ames!elroy!cit-vax!ucla-cs!zen!ucbvax!sdcsvax!nosc!humu!uhmanoa!aloha1!islenet!jons
From: jons@islenet.UUCP (Jonathan Spangler)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Low level format
Message-ID: <3524@islenet.UUCP>
Date: Sun, 20-Sep-87 10:29:55 EDT
Article-I.D.: islenet.3524
Posted: Sun Sep 20 10:29:55 1987
Date-Received: Wed, 23-Sep-87 00:39:50 EDT
References: <3274@log-hb.UUCP>
Reply-To: jons@islenet.UUCP (Jonathan Spangler)
Organization: Islenet Inc.,  Honolulu
Lines: 21

try this:

A>debug
-g=c800:5      <--- this works for most controllers

  *OR*
-g=c800:ccc    <--- this works for Adaptec controllers

Your other choice here is to look at a hard disk utility called
"Disk Manager", which I've used on a number of different configurations,
including XT's, AT's, 386's; 20meg, 40meg, 80meg; RLL-AT controllers,
standard WD-16 bit controllers, Konan, DTC, etc.

I like it alot!

Aloha,

-- 
Jonathan Spangler
UUCP:         {ihnp4,vortex,dual}!islenet!jons
OPUS/FIDONET: Sysop@(12/6) HTCS BBS (808)531-2659, 24 hrs., Honolulu