Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!rosevax!kksys!gk
From: gk@kksys.UUCP (Greg Kemnitz)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Adding 3 1/2" drive to IBM AT
Message-ID: <377@kksys.UUCP>
Date: Sun, 20-Sep-87 17:56:18 EDT
Article-I.D.: kksys.377
Posted: Sun Sep 20 17:56:18 1987
Date-Received: Wed, 23-Sep-87 04:47:06 EDT
References: <2889@whuts.UUCP> <518@parcvax.Xerox.COM>
Reply-To: gk@kksys.UUCP (Greg Kemnitz)
Organization: K and K Systems, Minneapolis
Lines: 28
Keywords: IBM AT;3 1/2"

In article <518@parcvax.Xerox.COM> burton@parcvax.xerox.com.UUCP (Philip M. Burton) writes:
>I've seen ads for AT-compatibles that show a case with all three right side
>drive slots available, not just the two that IBM has allowed us.  Some of
>these cases appear to be the exact same size as IBM's.   
>
>If any net reader has an AT-clone with three available drive slots available,
>please post the name of the clone maker, or the cabinet maker, if possible.
>
>Philip Burton       burton@parcvax.COM   ...!hplabs!parcvax!burton
>Xerox Corp.         preferred path: burton.osbunorth@xerox.COM
>408 737 4635   ... usual disclaimers apply ...

We sell two different clones which you may be interested in... one has
three slots on the right -- It is made by Laser Digital.  The other
has *four* slots -- two on right, and two more just to the left.  It
is made by Indtech (I'm using one now - 10/0 running Microport UNIX).
Both systems use cases which visually appear to be the same size as an
IBM box (I have not measured them to be sure there is not a *small*
difference in case size).

If you need any other info, I can be contacted at the address or
telephone number below.

-- 
Greg Kemnitz              |   amdahl \
K and K Systems           |   ihnp4   !meccts!kksys!gk
P.O. Box 41804            |   rutgers/
Plymouth, MN  55441-0804  |  AT&T and clones: (612)475-1527