Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!uw-beaver!cornell!batcomputer!pyramid!octopus!pete
From: pete@octopus.UUCP (Pete Holzmann)
Newsgroups: comp.sys.ibm.pc,comp.sys.att
Subject: Re: Periscope III Compatibility (was: 6300 bugs?)
Message-ID: <300@octopus.UUCP>
Date: Sat, 26-Sep-87 02:12:49 EDT
Article-I.D.: octopus.300
Posted: Sat Sep 26 02:12:49 1987
Date-Received: Sun, 27-Sep-87 10:11:27 EDT
References: <290@gvgspd.UUCP> <862@sask.UUCP> <299@octopus.UUCP> <2153@ihuxy.ATT.COM>
Reply-To: pete@octopus.UUCP (Pete Holzmann)
Followup-To: comp.sys.ibm.pc
Organization: Octopus Enterprises, Cupertino, CA
Lines: 23
Summary: Compatible with most clones
Xref: mnetor comp.sys.ibm.pc:8329 comp.sys.att:1325

In article <2153@ihuxy.ATT.COM> vg55611@ihuxy.ATT.COM (gopal) writes:
>In article <299@octopus.UUCP>, pete@octopus.UUCP (Pete Holzmann) writes:
>> The 6300/6300+ do not have completely compatible BUSES. Thus, ...
>> ...my Periscope III debugger board will not work.
>How many clones does this debugger work on ?

According to the documentation, it works on basically all clones that use
the IBM bus signal layout. The noted exceptions are 6300/6300+, and two flavors
of Compaq Deskpro: the 8086 and the 80386 ('286 presumably ok). 

It seems to work fine on an ATronics-board based AT, and on my old Televideo
AT (which is what I use it on most of the time).

>
>Venu P. Gopal
>ihnp4!ihuxy!vg55611

Pete Holzmann
-- 
  OOO   __| ___      Peter Holzmann, Octopus Enterprises
 OOOOOOO___/ _______ USPS: 19611 La Mar Court, Cupertino, CA 95014
  OOOOO \___/        UUCP: {hplabs!hpdsd,pyramid}!octopus!pete
___| \_____          Phone: 408/996-7746