Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!nbires!isis!udenva!ssds!tommy
From: tommy@ssds.UUCP (Tommy Phillips)
Newsgroups: comp.sys.ibm.pc
Subject: Re: More Procomm Problems
Message-ID: <239@ssds.UUCP>
Date: Mon, 5-Oct-87 19:44:22 EDT
Article-I.D.: ssds.239
Posted: Mon Oct  5 19:44:22 1987
Date-Received: Fri, 9-Oct-87 03:16:44 EDT
References: <1745@gryphon.CTS.COM>
Reply-To: tommy@ssds.UUCP (Tommy Phillips)
Followup-To: comp.sys.ibm.pc
Distribution: na
Organization: SSDS, Inc., Littleton, CO
Lines: 19
Keywords: procomm CompuServe

Hi-
	Is anyone out there using Procomm on an AT (clone) to use CompuServe?
I seem to be having trouble with it...
	I try to download using XMODEM in RELAXED mode and I get timeouts
until Procomm gives up.  This is using up my time, money and patience.  I
try using Procomm's CompuServe B protocol and the only thing I can do to
regain control of my machine is break the session.
	Am I missing something?  I have tried to find some setting I've
missed by snooping around the GO TERMINAL screen, but no luck.  I suspect it's
my fault; I was never able to get XMODEM to work with my Tandy 600 either.
	Any ideas are welcome.

			Thank you.



-- 
Tommy Phillips
{hao,nbires}!isis!ssds!tommy