Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!sri-unix!sri-spam!mordor!lll-tis!ames!ucbcad!zen!ucla-cs!cit-vax!stever
From: stever@cit-vax.Caltech.Edu (Steve Rabin  )
Newsgroups: comp.sys.ibm.pc
Subject: Which hardware interrupt?
Message-ID: <4149@cit-vax.Caltech.Edu>
Date: Wed, 7-Oct-87 15:03:49 EDT
Article-I.D.: cit-vax.4149
Posted: Wed Oct  7 15:03:49 1987
Date-Received: Sat, 10-Oct-87 13:08:31 EDT
Reply-To: stever@cit-vax.UUCP
Organization: California Institute of Technology
Lines: 9

The XT Tech ref manual lists a bunch of port addresses for use
by a prototype card.  What I would like to know is whether it
is possible for my prototype card to use interrupts, and if
so, which interrupt to use.

Please reply directly to me (stever@vlsi.caltech.edu).
If there is enough interest I will summarize to the net.

Thanks,  Steve