Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!ukma!psuvm.bitnet!gti
From: gti@psuvm.bitnet.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Help: with PS/2 model 30 and 5 1/4" drive
Message-ID: <21764GTI@PSUVM>
Date: Wed, 7-Oct-87 08:54:59 EDT
Article-I.D.: PSUVM.21764GTI
Posted: Wed Oct  7 08:54:59 1987
Date-Received: Sat, 10-Oct-87 15:23:28 EDT
Organization: The Pennsylvania State University - Computation Center
Lines: 14

I was wondering if someone out there cound help me. Just recently
I setup a model 30 and attached the 5 1/4" IBM adapter drive to it
and found out that I could no longer use the normal B drive. Since
the ribbon cable for the B drive is now connected to the adapter
board for the 5 1/4". Is it possible to create a cable with a switch
in it so that I could use the normal B drive or the 5 1/4" drive with
out opening up the case? The reason I want to do this, is because
the 5 1/4" drive will be attached permamently, and I still want the
option of having 2 3 1/2" drive for functions like COPY A:*.* B: nd
DISKCOPY A: B: and the like. Could anyone out there tell me if this
is at all possible?
     
                                         Leon Geesey