Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!ukma!psuvm.bitnet!tuccvm.bitnet!npasmith
From: npasmith@tuccvm.bitnet.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: TEKKermit works on Hercules (and maybe on EGA, Olivetti).
Message-ID: <15NPASMITH@TUCCVM>
Date: Wed, 7-Oct-87 13:34:35 EDT
Article-I.D.: TUCCVM.15NPASMITH
Posted: Wed Oct  7 13:34:35 1987
Date-Received: Sat, 10-Oct-87 15:24:28 EDT
Organization: Triangle Universities Computation Center
Lines: 21

>From: palmer@oodis01.ARPA (Jim Palmer)
>Newsgroups: comp.sys.ibm.pc
>Subject: Re: TEKkermit posted
>Date: 5 Oct 87 21:43:14 GMT
>References: <876@sask.UUCP>
>Summary: Whoa there! NOT for IBMs (LONG)
     
Try:
     
SET TERMINAL GRAPHICS ? --> CGA, EGA, Hercules, Olivetti.
     
As far as not being v. 2.29b, I think you might be right.
The important thing is that I tried it with hercules and
IT WORKS!
I tried it with SAS/GRAPH using VM/CMS over a 7171.  The graph
was almost perfect.  There was one spurious dot sent near the
start (it varied from run to run), and I had to manually return
to non-TEK mode  (ctrl right-bracket C, then C worked).
     
                            Phil Smith