Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!amdcad!ames!sdcsvax!ucbvax!hplabs!sdcrdcf!otto!jimi!fountain
From: fountain@jimi.cs.unlv.edu (John Fountain, Jr.)
Newsgroups: comp.sys.ibm.pc
Subject: Need TST? to update clock with ATNX
Message-ID: <660@jimi.cs.unlv.edu>
Date: Wed, 7-Oct-87 21:52:03 EDT
Article-I.D.: jimi.660
Posted: Wed Oct  7 21:52:03 1987
Date-Received: Sun, 11-Oct-87 01:22:28 EDT
Reply-To: fountain@jimi.cs.unlv.edu (John Fountain, Jr.)
Organization: University of Nevada, Las Vegas
Lines: 24



Help! I am running MS-DOS 3.1 with ATNX 1.61 from Alloy.
The PC-SLAVE II card allows me to connect a slave terminal
to the ATNX 'hard disk access' software.  The problem lies
in ATNX allowing the system clock to lose 15 minutes per
day...

Alloy supplies a utility called UPTIME which is a TSR that
adds small increments to the system clock to account for the
'time-sliced' losses.  IT DOESN'T WORK!  It updates the clock
in VERY erradic fashion.

Does anyone in netland have TSR that might run ?


beFUDled

jfj

(if e-mail doesn''t work I can be reached at (702)367-3247 or by
3906 Calle Tereon
Las Vegas, Nevada 89103)
gracias in advance