Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!rutgers!rochester!kodak!gardner
From: gardner@kodak.UUCP (dick gardner)
Newsgroups: comp.sys.ibm.pc
Subject: Re: More Procomm Problems
Message-ID: <967@kodak.UUCP>
Date: Fri, 9-Oct-87 07:59:56 EDT
Article-I.D.: kodak.967
Posted: Fri Oct  9 07:59:56 1987
Date-Received: Sun, 11-Oct-87 13:38:53 EDT
References: <1745@gryphon.CTS.COM> <239@ssds.UUCP>
Reply-To: gardner@kodak.UUCP (dick gardner)
Distribution: na
Organization: Eastman Kodak Co, Rochester, NY
Lines: 37
Keywords: procomm CompuServe

In article <239@ssds.UUCP> tommy@ssds.UUCP (Tommy Phillips) writes:
>Hi-
>	Is anyone out there using Procomm on an AT (clone) to use CompuServe?
>I seem to be having trouble with it...
>	I try to download using XMODEM in RELAXED mode and I get timeouts
>until Procomm gives up.  This is using up my time, money and patience.  I
>try using Procomm's CompuServe B protocol and the only thing I can do to
>regain control of my machine is break the session.
>
>
>
>-- 
----------------------------------------------------------------
Tried to send this via e-mail, but the mailer barfed on the address
----------------------------------------------------------------

Tommy-
	I had the same problem using a Microcom 2400 modem on Compuserve.
At home I had used Procomm without any trouble on Racal-Vadic 1200 baud 
modem (dumb-not Hayes compatible) and Xmodem worked OK.  But at work
with the Hayes-compatible Microcom I had trouble.	

It really drove me nuts until I discovered that I had configured the modem
for Xon/Xoff protocol.  The modem allows using it on the telephone side, on
the serial side, and/or passing it thru.  I forget how it was in my case,
but I eliminated it altogether and my problem went away.  

Hope this is helpful.

=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
   Dick Gardner -- Eastman Kodak Co.  Rochester, New York  14650
                   Phone: (716) 477-1002
                   UUCP: {allegra,rutgers}!rochester!kodak!gardner
  "Oh yeah?!? Well, MY computer is SOOOOO FAST, it executes an infinite
     						loop in 6 seconds!!!"
=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#