Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!uunet!husc6!rutgers!clyde!bellcore!wind!tr From: tr@wind.bellcore.com (tom reingold) Newsgroups: comp.sys.ibm.pc Subject: TurboC question: How do I use external libraries with TC? Message-ID: <2964@bellcore.bellcore.com> Date: Thu, 8-Oct-87 14:06:03 EDT Article-I.D.: bellcore.2964 Posted: Thu Oct 8 14:06:03 1987 Date-Received: Sun, 11-Oct-87 17:00:42 EDT Sender: news@bellcore.bellcore.com Reply-To: tr@wind.UUCP (tom reingold) Organization: Bellcore, Morristown, Noo Joizy Lines: 15 Keywords: help Emotion: confused State-of-being: rather awake The subject line pretty much says it. I want to use the integrated environment, i.e. TC.EXE. I want to be able to link with Turbo's standard libraries *plus* my libraries that I use for graphics. I know how to do this with MAKE but when I follow the instructions on page 68 of the user's guide, I get "undefine symbol" messages all over the place. Help! Thank you very large. Tom Reingold INTERNET: tr@bellcore.bellcore.com Bell Communications Research UUCP: !bellcore!tr 435 South St room 2L350 SOUNDNET: (201) 829-5119 [work] Morristown, NJ 07960 (201) 287-2345 [home]