Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!amdcad!ames!elroy!mahendo!jplgodo!wlbr!etn-rad!jru
From: jru@etn-rad.UUCP (John Unekis)
Newsgroups: comp.sys.ibm.pc
Subject: IBM AT Bus
Message-ID: <292@etn-rad.UUCP>
Date: Fri, 9-Oct-87 13:56:56 EDT
Article-I.D.: etn-rad.292
Posted: Fri Oct  9 13:56:56 1987
Date-Received: Sun, 11-Oct-87 17:41:47 EDT
Reply-To: jru@etn-rad.UUCP (John Unekis)
Distribution: comp.sys.ibm.pc
Organization: Eaton Inc. IMSD, Westlake Village, CA
Lines: 11
Keywords: AT bus
Summary: Need Bus Extender

I am in need of a solution to a particular problem which I hope someone
out there can help me with. We have a PC/AT with all the slots currently
used up in the backplane. We would like to add another card to the system
but there is no room. We have located a box containing a passive AT bus
backplane card, but we need a bus repeater or bus extender card which will
electrically connect the two busses and preserve the signal timing. We
have found a connector which will transfer the XT portion of the bus, but
we need a card that will connect the whole AT 16-bit bus. Does anyone out
there know of such a beasty, and where it might be obtained?

Thanks in advance:  {ihnp4 or voder}!wlbr!etn-rad!jru