Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!sri-unix!sri-spam!mordor!lll-tis!ptsfa!ihnp4!homxb!mtuxo!mtune!codas!killer!tness1!petro!ssbn!bill
From: bill@ssbn.UUCP (Bill Kennedy)
Newsgroups: comp.sys.ibm.pc
Subject: Z15x printer
Message-ID: <385@ssbn.UUCP>
Date: Fri, 9-Oct-87 11:45:12 EDT
Article-I.D.: ssbn.385
Posted: Fri Oct  9 11:45:12 1987
Date-Received: Mon, 12-Oct-87 07:07:36 EDT
Distribution: na
Organization: W.L. Kennedy Jr. & Associates, Pipe Creek, TX
Lines: 12

I have an ancient Zenith luggable, model Z-161.  Eons ago I was doing
something that prompted me to disable the printer port on the memory
card (the Z-161 is the same as the Z-15x series).  I did that by pulling
out the IC's that weren't stuffed on the second memory card and the
addressing jumpers.  Now I want to re-enable the printer port but I
can't figure out which IC's go where, nor is there any documentation in
the book on the memory card.  I have the IC's buy could some kind soul
tell me what parts go into U452, U453, U461, U462, U463, U472 and how
to jumper it for LPT1?  I live too far from a Heath store to go there,
Thanks,
-- 
Bill Kennedy {cbosgd | ihnp4!petro | sun!texsun!rrm}!ssbn!bill