Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!endor!singer
From: singer@endor.harvard.edu (Andrew Singer)
Newsgroups: comp.sys.mac
Subject: Re: TechNotes: Printing on the LaserWriter
Message-ID: <2863@husc6.UUCP>
Date: Wed, 23-Sep-87 08:33:49 EDT
Article-I.D.: husc6.2863
Posted: Wed Sep 23 08:33:49 1987
Date-Received: Sat, 26-Sep-87 01:35:15 EDT
References: <6338@ut-ngp.UUCP>
Sender: news@husc6.UUCP
Reply-To: singer@endor.UUCP (Andrew Singer)
Organization: Aiken Computation Lab Harvard, Cambridge, MA
Lines: 27
Keywords: too wide?
Summary: Font Substitution?

In article <6338@ut-ngp.UUCP> jdm@ut-ngp.UUCP (Jim Meiss) writes:
>horizontal lines too long for the margins, and occasional page breaks 
>in improper places, leading to empty pages, and usually a total number 
>of pages which is larger than the footer indicates ( e.g. "page 12 of 11", 
>
>Are you supposed to do something the equivalent of "Tall Adjusted" on the
>Laserwriter to get this to work, or is it that Tech Support just likes it
>this way? :-(
>
>					Jim Meiss
>					jdm@ngp.UTEXAS.EDU

I have run into the same problem before, and traced the problem down to the
fact that I didn't have the Helvetica fonts on my system, so Geneva was
being substituted. As many resume writers know, this font substitution can
screw up a carefully formatted document...

This may not be your exact problem, but perhaps it's related?

		-_Rich

**Note: The opinions stated herein are my own and do not necessarily represent
the policies of my employer (THINK Technologies, Inc.)

Richard M. Siegel
Customer Support Representative
THINK Technologies, Inc.