Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!mit-eddie!bloom-beacon!think!ames!aurora!labrea!decwrl!pyramid!hplabs!sdcrdcf!trwrb!wiley!cbn
From: cbn@wiley.UUCP
Newsgroups: comp.sys.mac
Subject: Aztec Debugger problems
Message-ID: <1403@wolfgang.UUCP>
Date: Thu, 24-Sep-87 13:47:50 EDT
Article-I.D.: wolfgang.1403
Posted: Thu Sep 24 13:47:50 1987
Date-Received: Sat, 26-Sep-87 14:44:28 EDT
Reply-To: cbn@wiley.UUCP (Chris Newton)
Organization: TRW Inc., Redondo Beach, CA
Lines: 25

I have a fairly large program under development (~ 100k) which I'm
trying to debug using Aztec's 'db' symbolic debugger.  Db starts ok
and loads the program, but I get a "no more symbol space" message. (The
exact wording may be different.)

I first thought I might be out of memory, since I was originally using a
512ke machine, but the same problem occurs on a Mac plus. I can run the
program from db once it's loaded but it behaves strangely and I suspect the
lack of symbols is causing db to act up.  The 'dc' command shows a large
symbol table in the code segment, so I suspect that load worked.  It
probably ran out of space loading the symbols in the data segment - a 'dd'
command shows nothing.

Does anyone out there have experience with this problem?  I've tried both
the 1.06h and the 3.4 versions of 'db'.  Is there any way to expand the
space reserved by 'db' for its tables?

Thanks in advance...


Chris B. Newton
TRW - Redondo Beach, Ca.
----------------------------------
USENET: {cit-vax,trwrb}!wiley!cbn
Compuserve: 70315,1211