Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!endor!singer
From: singer@endor.harvard.edu (Andrew Singer)
Newsgroups: comp.sys.mac
Subject: Re: interrupt/reset buttons on MAC II
Message-ID: <2901@husc6.UUCP>
Date: Tue, 29-Sep-87 08:46:00 EDT
Article-I.D.: husc6.2901
Posted: Tue Sep 29 08:46:00 1987
Date-Received: Wed, 30-Sep-87 05:56:28 EDT
References: <2253@druhi.ATT.COM>
Sender: news@husc6.UUCP
Reply-To: singer@endor.UUCP (Andrew Singer)
Distribution: comp
Organization: THINK Technologies, Inc., Bedford, MA
Lines: 29
Keywords: help

In article <2253@druhi.ATT.COM> cosmos@druhi.ATT.COM (GuestRA) writes:
>
>We recently got a Mac II at work and with it came the usual buttons.
>However, I don't know where they go.  There doesn't seem to be any mention
>of how to install them in the documentation I got.  Can someone clue my in?

They go on the righthand side of the machine, towards the back of the
air vents. If you turn the unit 90 degrees clockwise,and look carefully,
you'll see where the buttons should go.

I wonder why Apple didn't document this?

		--Rich




**The opinions stated herein are my own opinions and do not necessarily
represent the policies or opinions of my employer (THINK Technologies, Inc).

Richard M. Siegel
Customer Support Representative
THINK Technologies, Inc.

Uucp: {decvax, ucbvax, sun}!harvard!endor!singer
Internet/Arpanet: singer@harvard.harvard.edu

No one writes programs that work right the first time. If they did,
I'd be out of a job.