Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!mcvax!nikhefh!gert
From: gert@nikhefh.UUCP (Gert Poletiek)
Newsgroups: comp.sys.mac
Subject: Re: interrupt/reset buttons on MAC II
Message-ID: <395@nikhefh.UUCP>
Date: Wed, 30-Sep-87 14:29:25 EDT
Article-I.D.: nikhefh.395
Posted: Wed Sep 30 14:29:25 1987
Date-Received: Sun, 4-Oct-87 21:02:17 EDT
References: <2253@druhi.ATT.COM> <2901@husc6.UUCP>
Reply-To: gert@nikhefh.UUCP (Gert Poletiek)
Distribution: comp
Organization: Nikhef-H, Amsterdam (the Netherlands).
Lines: 24
Keywords: help

In article <2901@husc6.UUCP> singer@endor.UUCP (Andrew Singer) writes:
>In article <2253@druhi.ATT.COM> cosmos@druhi.ATT.COM (GuestRA) writes:
>>
>>We recently got a Mac II at work and with it came the usual buttons.
>>However, I don't know where they go.  There doesn't seem to be any mention
>>of how to install them in the documentation I got.  Can someone clue my in?
>
>They go on the righthand side of the machine, towards the back of the
>air vents. If you turn the unit 90 degrees clockwise,and look carefully,
>you'll see where the buttons should go.


At the righthand side of the reset interrupt buttons pad 12 vertical vents
should be left free. The reset button is the one closest to the front of the
machine as on the other Macs.



Gert Poletiek

NIKHEF-H, Dutch National Institute for Nuclear and High Energy Physics
          Kruislaan 409, P.O.Box 41882, 1009 DB Amsterdam, The Netherlands
UUCP:     {decvax,cernvax,unido,seismo}!mcvax!nikhefh!gert
bitnet:   nikhefh!gert@mcvax.bitnet, U00025@hasara5.bitnet