Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!sdcsvax!ucsdhub!hp-sdd!hplabs!hpcea!hpcid!cnc
From: cnc@hpcid.HP.COM (Chris Christensen)
Newsgroups: comp.sys.mac
Subject: Re: Resource Questions
Message-ID: <3320026@hpcid.HP.COM>
Date: Fri, 2-Oct-87 14:13:15 EDT
Article-I.D.: hpcid.3320026
Posted: Fri Oct  2 14:13:15 1987
Date-Received: Fri, 9-Oct-87 04:51:08 EDT
References: <7244@dartvax.UUCP>
Lines: 28

I have had no luck with copying PICT files from the scrapbook into
ResEdit. Yes, I did change the resource ID. Observe the following:

1) get working program (from elsewhere) that has PICT resource
program displays picture

2) replace resource with my own PICT file and change ID to same as other
PICT (which I deleted from the resource file).
program now does not display the picture.

3) copy back the original picture to the resource file (deleteing mine first)
and again reset the resource ID.
program now displays the original picture.

I am obviously overlooking something.

I even tried powering off my mac in between steps to make sure
the resources were purged from memory (I was paranoid by this time).

What could I be missing?

P.S. tried the same thing with an ICON resource and it worked fine.


--------------------------------------------------------------------------------
Chris Christensen					Hewlett-Packard
(408) 553-2955 or telnet 553-2955	Design Technology Center
cnc@hpcid.hp.com					Santa Clara, CA