Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!mms
From: mms@utgpu.UUCP
Newsgroups: comp.sys.mac
Subject: Re: Possible LSC improvements
Message-ID: <1987Oct9.001743.14846@gpu.utcs.toronto.edu>
Date: Fri, 9-Oct-87 00:17:43 EDT
Article-I.D.: gpu.1987Oct9.001743.14846
Posted: Fri Oct  9 00:17:43 1987
Date-Received: Sun, 11-Oct-87 05:54:04 EDT
References: <2071@sfsup.UUCP| <170026@acf3.NYU.EDU> <2936@husc6.UUCP>
Reply-To: mms@gpu.utcs.UUCP (John J. Chew III)
Organization: The Poslfit Committee
Lines: 10
Checksum: 24533


How about being able to set the <> and "" paths to be used with #include?
I'd like to be able to put my header files on a small ramdisk, as reading
them in seems to be the most time-consuming part of my compiles (isn't that
a great thing to say about a compiler?)
-- 
john j. chew (v3.0)                       poslfit@gpu.utcs.toronto.edu
+1 416 463 5403 (300/1200 bps)            poslfit@utorgpu.bitnet
{cbosgd,decvax,mnetor,utai,utcsri,{allegra,linus}!utzoo}!utgpu!poslfit
"Script-G for open, sub-delta for durchschnitt"