Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!endor!singer
From: singer@endor.harvard.edu (Richard Siegel)
Newsgroups: comp.sys.mac
Subject: Re: Possible LSC improvements
Message-ID: <2966@husc6.UUCP>
Date: Fri, 9-Oct-87 10:27:26 EDT
Article-I.D.: husc6.2966
Posted: Fri Oct  9 10:27:26 1987
Date-Received: Sun, 11-Oct-87 13:54:57 EDT
References: <2071@sfsup.UUCP| <170026@acf3.NYU.EDU> <2936@husc6.UUCP> <1987Oct9.001743.14846@gpu.utcs.toronto.edu>
Sender: news@husc6.UUCP
Reply-To: singer@endor.UUCP (Richard Siegel)
Organization: THINK Technologies, Inc., Bedford, MA
Lines: 17

In article <1987Oct9.001743.14846@gpu.utcs.toronto.edu> mms@gpu.utcs.UUCP (John J. Chew III) writes:
>
>
>How about being able to set the <> and "" paths to be used with #include?
>I'd like to be able to put my header files on a small ramdisk, as reading

	A good idea; I'll submit it to Mike, and see if he hasn't already
considered it.

		--Rich

**The opinions stated herein are my own opinions and do not necessarily
represent the policies or opinions of my employer (THINK Technologies, Inc).

* Richard M. Siegel | {decvax, ucbvax, sun}!harvard!endor!singer    *
* Customer Support  | singer@endor.harvard.edu			    *
* THINK Technologies, Inc.  (No snappy quote)                       *