Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!psuvax1!vu-vlsi!devon!paul
From: paul@devon.UUCP
Newsgroups: comp.sys.tandy,comp.unix.xenix
Subject: Tandy Xenix & 2400 baud getty
Message-ID: <472@devon.UUCP>
Date: Wed, 30-Sep-87 08:25:28 EDT
Article-I.D.: devon.472
Posted: Wed Sep 30 08:25:28 1987
Date-Received: Sat, 3-Oct-87 01:25:15 EDT
Organization: Devon Computer Services, Allentown, PA
Lines: 25
Keywords: Tandy Xenix getty 2400
Xref: utgpu comp.sys.tandy:404 comp.unix.xenix:759

There's been some discussion lately about having a getty for Tandy
Xenix 3.x that allows one to set up an inbound modem to switch between
300, 1200 and 2400 baud.  Someone (michael@stb?) said that they had
written a getty and would post it.

So what's the problem?  All versions of Tandy Xenix since 3.1.0 have
been able to do just that!  In an addendum that came with the 3.1
upgrade package (_Using_the_Dial_Program_), the following `speed' codes
for use in /etc/ttys were defined:

	Code	Baud Rate cycle

	 3	1200 -> 300
	 5	300 -> 1200
	 P	300 -> 1200 -> 2400
	 Q	1200 -> 2400 -> 300
	 R	2400 -> 300 -> 1200

- paul

-- 
Paul Sutcliffe, Jr.

UUCP (smart):  paul@devon.UUCP
UUCP (dumb):   ...{rutgers,ihnp4,cbosgd}!bpa!vu-vlsi!devon!paul