Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!bloom-beacon!gatech!ukma!psuvm.bitnet!cunyvm!ndsuvm1.bitnet!nu092254
From: NU092254@NDSUVM1.BITNET (Brian Dall)
Newsgroups: comp.sys.apple,comp.terminals
Subject: SUPER SERIAL CARD HELP
Message-ID: <330NU092254@NDSUVM1>
Date: Tue, 29-Sep-87 23:21:41 EDT
Article-I.D.: NDSUVM1.330NU092254
Posted: Tue Sep 29 23:21:41 1987
Date-Received: Mon, 5-Oct-87 02:31:38 EDT
References: 866@sask.UUCP
Organization: North Dakota Higher Education Computer Network, Fargo, ND
Lines: 20
Xref: mnetor comp.sys.apple:2742 comp.terminals:496
DISCLAIMER: Author bears full responsibility for contents of this article.


Could someone please tell me what locations you tweak to set
the parity and data format.  I am using an Super Serial Card
in slot 2.  I want to be able to connect using  7E1.
     
   7 data bits
   1 stop bit
   even parity
     
      A friend who has a //c gave me a list of ctrl-I commands to
set the modem port, but my super serial card obviously doesn't
recognize them.
     
       take care,
                                     -Bri
     
________________________________________________________________________
Brian Dall        |                           |"It is dangerous to tell
PO Box 5112       |  NU092254@NDSUVM1.BITNET  | the people that laws are
NDSU Station      |                           | not just. . . ."
Fargo, ND  58105  |                           |  -Blaise Pascal