Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!husc6!cmcl2!brl-adm!brl-smoke!gwyn
From: gwyn@brl-smoke.UUCP
Newsgroups: comp.unix.questions
Subject: Re: Printer Hookup
Message-ID: <6509@brl-smoke.ARPA>
Date: Sat, 3-Oct-87 21:06:08 EDT
Article-I.D.: brl-smok.6509
Posted: Sat Oct  3 21:06:08 1987
Date-Received: Sun, 4-Oct-87 07:01:24 EDT
References: <616@artecon.artecon.UUCP>
Reply-To: gwyn@brl.arpa (Doug Gwyn (VLD/VMB) <gwyn>)
Distribution: na
Organization: Ballistic Research Lab (BRL), APG, MD.
Lines: 9

In article <616@artecon.artecon.UUCP> macbeth@artecon.UUCP () writes:
>	when we bump the baud rate up above 2400, we get about 100 lines of 
>	output and then it stops.

We had this problem with a Trilog ColorPlot-100 (Printronix, basically),
and it turned out that the printer, in addition to generating DC3, was
dropping DTR!  We hot-wired DTR constant-on.  We also had to have a
logic board swap before ALL the flow control problems were fixed (maybe
they gave you our old board!).