Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!oliveb!felix!zemon
From: jaapb@philmds.UUCP (Jaap Bottenberg)
Newsgroups: comp.unix.ultrix
Subject: Booting from am Eagle
Message-ID: <8541@felix.UUCP>
Date: Thu, 8-Oct-87 12:57:52 EDT
Article-I.D.: felix.8541
Posted: Thu Oct  8 12:57:52 1987
Date-Received: Mon, 12-Oct-87 19:24:55 EDT
Sender: zemon@felix.UUCP
Organization: Philips I&E, T&M, DTS
Lines: 23
Approved: zemon@felix.UUCP (Art Zemon)

When bringing up our Vax/750 to Ultrix2.0, I ran into  the next
problem.

The only disks on the system are two Eagles. They worked perfect
with Ultrix 1.0 1.1 and 1.2.

The new bootstrap for Ultrix2.0 does not support Eagles. So the
the installation got stuck.

Software Support in Utrecht responded that this is a known problem
and there is no way around it.

I don't believe, i'm the only one with this configuration and
that this problem has not been solved yet.

Any suggestions/solutions are welcome.

				Jaap Bottenberg
				Philips I&E, T&M, DTS,
				Building TQV-5 room 35,
				5600 MD Eindhoven, The Netherlands.
				phone: +31 40 788260
				uucp: mcvax!philmds!jaapb