Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!cmcl2!rutgers!sri-spam!ames!ucbcad!zen!ucla-cs!cit-vax!glewis
From: glewis@cit-vax.Caltech.Edu (Glenn M. Lewis)
Newsgroups: sci.electronics
Subject: RF Remote Control
Message-ID: <4167@cit-vax.Caltech.Edu>
Date: Fri, 9-Oct-87 14:44:54 EDT
Article-I.D.: cit-vax.4167
Posted: Fri Oct  9 14:44:54 1987
Date-Received: Mon, 12-Oct-87 01:23:02 EDT
Reply-To: glewis@cit-vax.UUCP (Glenn M. Lewis)
Organization: California Institute of Technology
Lines: 15
Keywords: Help.


	I am designing an RS-232 9600 baud radio link.  I need information
on how to build a relatively high power (~1 mile distance) transmitter /
receiver link.  All I really need is the information on how to boost my RF
signal up to acceptable levels to transmit, and then how to filter out that
frequency.  I will probably use an RF frequency near 27MHz, so as to make the
FCC happy.
	Do any of you electronics Wizards have reference books that give me
schematics, or could you yourselves help me out?  I would very much appreciate
it.  Heck, maybe someone else would be interested in the complete schematics
once the things works???
	Thank you.
						-- Glenn Lewis
-- 
glewis@cit-vax.caltech.edu