Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!burl!codas!killer!tness1!mechjgh
From: mechjgh@tness1.UUCP
Newsgroups: comp.emacs
Subject: Re: GnuEmacs M- Files
Message-ID: <269@tness1.UUCP>
Date: Sun, 25-Oct-87 01:26:43 EST
Article-I.D.: tness1.269
Posted: Sun Oct 25 01:26:43 1987
Date-Received: Sat, 31-Oct-87 08:27:56 EST
References: <8710240703.AA20395@ucbvax.Berkeley.EDU>
Reply-To: mechjgh@tness1.UUCP (Greg Hackney 214+464-2771)
Organization: S.W. Bell, Network Engineering, Texas
Lines: 18
Summary: works on Tower 32 and XP

In article <8710240703.AA20395@ucbvax.Berkeley.EDU> USGCORB@LEHIIBM1.BITNET (Stephen Corbesero) writes:
>
>Are there config files in existence for the tandem-lxn and/or the
>NCR tower-xp systems?  I know there is one for the "big tower", but
>apparently that is a different beast.
>Thanks in advance......
>   Stephen Corbesero

m-tower32.h works for the Tower-XP also, but crt0.c needs work for
both models. It was broken for the Towers sometime after version 17.

I posted crt0.c twice recently, but send email if you missed it.

--
Greg Hackney
Southwestern Bell Telephone
mechjgh@tness1.UUCP
{ihnp4,killer,petro}!tness1!mechjgh