Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!sq!jim
From: jim@sq.UUCP
Newsgroups: comp.laser-printers
Subject: Re: LaserWriter spilling toner
Message-ID: <1987Oct30.122616.6727@sq.uucp>
Date: Fri, 30-Oct-87 12:26:16 EST
Article-I.D.: sq.1987Oct30.122616.6727
Posted: Fri Oct 30 12:26:16 1987
Date-Received: Sat, 31-Oct-87 11:58:47 EST
References: <8710062124.AA23017@brillig.umd.edu> <8710271720.AA04699@brillig.umd.edu>
Reply-To: jim@sq.UUCP (Jim Sawchuk)
Organization: SoftQuad Inc., Toronto
Lines: 11
Checksum: 39417

In article <8710271720.AA04699@brillig.umd.edu> hp-sdd!jewett@hpl-opus.HP.COM (Bob Jewett) writes:
>
>> every now and then a large amount of toner powder is dumped inside the
>
>    Are you sure no one is removing the cartridge and shaking it?  Some
>    people do that to even out the printing towards the end of the toner.
>    There might be problems if they try it earlier or with the wrong motion.

So what's the correct motion?
And when exactly is "earlier"?