Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!rutgers!rochester!udel!rminnich
From: rminnich@udel.EDU (Ron Minnich)
Newsgroups: comp.sys.amiga
Subject: Re: A2000 serial port != A1000 (ackkkk!)(and 500 || <> 1000 ||)
Message-ID: <610@louie.udel.EDU>
Date: Mon, 19-Oct-87 22:17:26 EDT
Article-I.D.: louie.610
Posted: Mon Oct 19 22:17:26 1987
Date-Received: Wed, 21-Oct-87 00:55:41 EDT
References: <1962@ucbcad.berkeley.edu>
Reply-To: rminnich@udel.EDU (Ron Minnich)
Organization: University of Delaware
Lines: 9
Summary: The A500 parallel port is <> the A1000 Parallel port

Speaking of incompatibilities, the A500 parallel connector is female,
the A1000 is male. It does not stop there. If your current cable passes
14, 16, or 25, cut them all out, or you will get problems. Cut out 15 too
while you are at it.
Why were they made different??? and the A500 serial <> A2000 serial?
This makes no sense ??

-- 
ron (rminnich@udel.edu)