Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!decwrl!decvax!ucbvax!POMONA.BITNET!0ALEVI
From: 0ALEVI@POMONA.BITNET
Newsgroups: comp.sys.atari.st
Subject: BITNET mail follows
Message-ID: <8710262158.AA11433@ucbvax.Berkeley.EDU>
Date: Mon, 26-Oct-87 16:53:00 EST
Article-I.D.: ucbvax.8710262158.AA11433
Posted: Mon Oct 26 16:53:00 1987
Date-Received: Wed, 28-Oct-87 19:58:24 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 26

Date: 26 October 1987, 14:50:23 PDT
From: 0ALEVI at POMONA
To:   INFO-ATARI16 at SCORE.STANFORD.EDU

=========================================================================




I am planning on putting together a memory map for the 1040/520 ST.
I would appreciate any input...  If you know of ANY addresses which the
ST uses, tell me please! (even if they seem insignificant)
Since I have very little information about the inside workings of the
ST, I will be relying on the input I get from you.
If anybody would like a copy of this memory-map-to-be, just let me know
and I'll send you one.
Thanx in advance for any help you can give.
I also have one more thing to say...
Has anyone successfully converted an RGB signal to a composite signal
using the public domain circuit diagram and instructions?  If so, did
you have to make any modifications to the circuit?  Does this circuit
make sure that the ST thinks that you have a color monitor hooked
up?(I've had crashes using programs which work in color only with my
monochrome monitor)
Thanx in advance.
By the way, my adress is : 0ALEVI@POMONA.BITNET