Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!wp3b01!eo
From: eo@wp3b01.UUCP (3918)
Newsgroups: comp.sys.att
Subject: Re: 6300+ and internal modems
Message-ID: <418@wp3b01.UUCP>
Date: Mon, 12-Oct-87 12:18:03 EDT
Article-I.D.: wp3b01.418
Posted: Mon Oct 12 12:18:03 1987
Date-Received: Tue, 13-Oct-87 07:23:26 EDT
References: <21997UH2@PSUVM>
Reply-To: eo@wp3b01.UUCP (Ed Oliveri)
Organization: AT&T -- White Plains
Lines: 20
Summary: Help!

In article <21997UH2@PSUVM> UH2@PSUVM.BITNET (Lee Sailer) writes:
>I know this was discussed a ways back.  But before I give up, I wanna
>try one more time.
>     
>What does it take to get uucp and the other Unix communications stuff
>to work via an internal modem?
>     
>It works fine as COM2: under Simultask, but there is no /dev/tty2.
>     

I too would like to know how to get my internal modem (AT&T 4112)
working in my 6300 PLUS.
It works fine with the Softcall software under MS-DOS, but UNIX
cannot seem to communicate with it.

Please post or mail any helpful info.  Thanks!

-- 
=============================================
"Fish are born in water, Man is born in In In