Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!amdahl!nsc!csi!csib!msommer
From: msommer@csib.UUCP (Mark Sommer)
Newsgroups: comp.sys.att
Subject: Re: line one for DATA?
Message-ID: <1256@csib.UUCP>
Date: Thu, 15-Oct-87 12:50:03 EDT
Article-I.D.: csib.1256
Posted: Thu Oct 15 12:50:03 1987
Date-Received: Sun, 18-Oct-87 08:40:16 EDT
References: <160@dalcsug.UUCP>
Reply-To: hplabs!bnrmtv!csi!msommer@csib.UUCP (Mark Sommer)
Distribution: na
Organization: Communications Solutions Inc., San Jose, Ca
Lines: 7
Keywords: One Modem, Two Lines
Summary: Only one OBM, not possible to use both PH0 and PH1.


I wish it were possible, but you cannot use both line for data simultaneously
because you are restricted to a single modem.

Sorry,

~Mark