Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!cmcl2!brl-adm!umd5!mimsy!oddjob!gargoyle!ihnp4!cbosgd!gwspc!cbcsta!n8emr!gws
From: gws@n8emr.UUCP (Gary W. Sanders )
Newsgroups: comp.sys.att
Subject: Re: 3B1 clock battery replacement
Message-ID: <272@n8emr.UUCP>
Date: Sun, 18-Oct-87 07:47:31 EDT
Article-I.D.: n8emr.272
Posted: Sun Oct 18 07:47:31 1987
Date-Received: Tue, 20-Oct-87 01:38:09 EDT
References: <126@ureka.UUCP>
Reply-To: gws@n8emr.UUCP (Gary W. Sanders (n8emr))
Organization: N8EMR's Ham BBS (HBBS), Columbus,Ohio
Lines: 26

In article <126@ureka.UUCP> charlie@ureka.UUCP (charlie crassi) writes:
>I have just received my Clock Battery Kit from Amperfax to replace the
>original 3B1 clock battery.
>
.......
>     2 each Panasonic AAA nicads ( roughly $ 1.50 - $ 2.00 )
>     1 instruction sheet telling me to unsolder the old battery terms
>       and solder in the new. That's it !!!!! ...............
........
>

	Hmm, How do they plan to charge the nicads? since the 
previous battery  was a lithium, there cant (shouldnt) be any charging 
circuit already in use, I guess you just have to pull out the batterys 
to charge them up.

	I looked at buying the upgrade kit a while back for some of
my office machine, but $25 for a battery is a bit high and replacment
batterys are easyly gotten..



-- 
Gary W. Sanders	 	{ihnp4|cbosgd}!n8emr!gws
(cis) 72277,1325 	(packet) N8EMR @ W8CQK
HAM/SWL BBS (HBBS) 614-457-4227.. 300/1200 bps