Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!ucbcad!ucbvax!janus!brand
From: brand@janus.uucp (Graham Brand)
Newsgroups: comp.sys.att
Subject: Dead clock/calendar
Message-ID: <21377@ucbvax.BERKELEY.EDU>
Date: Wed, 21-Oct-87 16:10:48 EDT
Article-I.D.: ucbvax.21377
Posted: Wed Oct 21 16:10:48 1987
Date-Received: Sat, 24-Oct-87 06:42:17 EDT
Sender: usenet@ucbvax.BERKELEY.EDU
Reply-To: brand@janus.UUCP (Graham Brand)
Distribution: comp.sys.ibm.pc
Organization: University of California, Berkeley
Lines: 12
Keywords: att pc6300
Summary: How to repair ....

The clock/calendar on my ATT PC6300 died recently. It no longer 
automatically displays the correct time on boot-up and does not advance
even when the correct time is entered at the "date" prompt. Before I get
into the circuit with soldering iron etc. I should like to know if any 
of you have useful suggestions as to the likely cause in order to reduce
my troubleshooting time. I do have the technical reference manual and am
not too worried about getting in there to fix it but I should like to 
avoid having to re-invent the wheel?

Thanks in advance,
Graham Brand (... ucbvax!ucbjanus.berkeley.edu!brand)
	     (    brand@janus.berkeley.edu          )