Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!sdcsvax!ucsdhub!hp-sdd!hplabs!sdcrdcf!trwrb!cadovax!gryphon!pnet02!howie
From: howie@pnet02.CTS.COM (Howard Herman)
Newsgroups: comp.sys.cbm
Subject: Re: hp thinkjet and C64C
Message-ID: <1968@gryphon.CTS.COM>
Date: Mon, 19-Oct-87 07:30:50 EDT
Article-I.D.: gryphon.1968
Posted: Mon Oct 19 07:30:50 1987
Date-Received: Wed, 21-Oct-87 00:04:28 EDT
Sender: root@gryphon.CTS.COM
Organization: People-Net [pnet02], Redondo Beach, CA
Lines: 11

Wouldn't the lasar use the standard Centronics connection?
If so, any of the readily available Xetec interfaces should
work out fine.  It goes from serial to centronics. Someone
using the Okidata Lasar did have to make up a new printer
file, but it works fine, with one bug still being worked out.
Apparently setting up for use with proportional fonts is
difficult, but possible. BTW, cost of the interface is about
$30.

UUCP: {hplabs!hp-sdd!crash, ihnp4!scgvaxd!cadovax}!gryphon!pnet02!howie
INET: howie@pnet02.CTS.COM