Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!necntc!celtics!roger
From: roger@celtics.UUCP (Roger B.A. Klorese)
Newsgroups: comp.sys.celerity
Subject: Re: problem with RARP in newest celerity release
Message-ID: <1836@celtics.UUCP>
Date: Thu, 22-Oct-87 16:01:38 EST
Article-I.D.: celtics.1836
Posted: Thu Oct 22 16:01:38 1987
Date-Received: Sun, 25-Oct-87 08:46:08 EST
References: <15814@topaz.rutgers.edu>
Reply-To: roger@celtics.UUCP (Roger B.A. Klorese)
Organization: CELERITY (Northeast Area), Framingham, MA
Lines: 14

In article <15814@topaz.rutgers.edu> hedrick@topaz.rutgers.edu (Charles Hedrick) writes:
>We have found a fairly serious problem with 3.4.88.

To clarify, this is a release built out of source at Rutgers, based on
Celerity release 3.4.77, which did indeed contain the improper RARP
code.  Do not confuse this with a *Celerity* 3.4.88 or later.  The 
problem code was disabled in binary release 3.4.78 and all later 3.4
versions.  RARP will be implemented fully and properly in a later
release.
-- 
 ///==\\   (Your message here...)
///        Roger B.A. Klorese, CELERITY (Northeast Area)
\\\        40 Speen St., Framingham, MA 01701  +1 617 872-1552
 \\\==//   celtics!roger@necntc.nec.com - necntc!celtics!roger