Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!sri-unix!teknowledge-vaxc!mkhaw
From: mkhaw@teknowledge-vaxc.ARPA (Mike Khaw)
Newsgroups: comp.sys.dec,comp.os.vms
Subject: Re: VAXstation keybd questions
Message-ID: <17942@teknowledge-vaxc.ARPA>
Date: Wed, 14-Oct-87 17:12:13 EDT
Article-I.D.: teknowle.17942
Posted: Wed Oct 14 17:12:13 1987
Date-Received: Fri, 16-Oct-87 06:32:41 EDT
References: <2494@ihlpf.ATT.COM>
Organization: Teknowledge, Inc., Palo Alto CA
Lines: 14
Xref: mnetor comp.sys.dec:398 comp.os.vms:3066

> I thought you had to be in VT100 emulation on a VT220 to get those
> mappings for F5 and F11, so maybe there is a similar setting on the
> VAXstation.  

I've tried using the workstation setup menus to set the "terminal type"
to vt100, but when I pop a new terminal window, "show term" says I'm
using a "vt200_series" terminal.  Even if I then "set term/dev=vt100",
I still get F5 = cycle and F11 = ESC[23~ ... FOO and double BAR.

Mike Khaw
-- 
internet:  mkhaw@teknowledge-vaxc.arpa
usenet:	   {uunet|sun|ucbvax|decwrl|uw-beaver}!mkhaw%teknowledge-vaxc.arpa
USnail:	   Teknowledge Inc, 1850 Embarcadero Rd, POB 10119, Palo Alto, CA 94303