Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!amdcad!ames!husc6!necntc!encore!loverso
From: loverso@encore.UUCP (John LoVerso)
Newsgroups: comp.sys.encore
Subject: Re: IEN-116 Name Server Port Address
Message-ID: <2120@encore.UUCP>
Date: Sun, 1-Nov-87 22:58:53 EST
Article-I.D.: encore.2120
Posted: Sun Nov  1 22:58:53 1987
Date-Received: Thu, 5-Nov-87 22:44:12 EST
References: <8710292127.AA28745@pvab.se>
Reply-To: loverso@encore.UUCP (John LoVerso)
Organization: Encore Computer Corp, Marlboro, MA
Lines: 12
Summary: The Ultimate Answer to the Ultimate Question in the Universe

In an article robert@pvab.UUCP (Robert Claeson) writes:
> I was just about to install the IEN-116 name server that was supplied with
> the Annex-UX 2.1 release, when I realized that I didn't know the port number
> and protocol that the IEN-116 server uses.

Its port 42, UDP.  The UDP should've been guessable from the code,
but you wouldn't have found the 42 unless you peeked in a 4.2-descended
/etc/services and/or looked it up in an Assigned Numbers RFC.  Never-the-less,
perhaps we should have a README file on the distribution tape.

John Robert LoVerso, Encore Computer Corp
encore!loverso, loverso@multimax.arpa