Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!mcvax!unido!fauern!mohr
From: mohr@fauern.UUCP
Newsgroups: comp.sys.hp
Subject: Problems with "S" on HP 9000/500 - (nf)
Message-ID: <114900001@fauern.UUCP>
Date: Tue, 13-Oct-87 06:10:00 EDT
Article-I.D.: fauern.114900001
Posted: Tue Oct 13 06:10:00 1987
Date-Received: Fri, 23-Oct-87 01:08:25 EDT
Lines: 27
Nf-ID: #N:fauern:114900001:000:886
Nf-From: fauern!mohr    Oct 13 11:10:00 1987

hallo out there,

we want to use the software package "S" for data analysis and graphics from
AT&T on our HP 9000 Series 500 running HP-UX.

We compiled it, but when started, it core dumped. The main problem is,
I think, that "S" is partly written in Fortran (Ratfor) and partly in C.
And on the HP 9000/500 under HP-UX the Fortran- and the C-Compiler do not
work so fine together as they should. So, does anybody

 i)   has experiences with "S" on a HP 9000/500 ?

 ii)  or has an idea, concerning our problem with such mixed
      Fortran/C - software ?

 iii) know, whether there is a version of "S" totally written in C
      ( or (UNIX-)Fortran ) ?

 iv)  any other ideas ?

Thanx,

  Bernd Mohr                     |       mohr@fauern.UUCP
  University of Erlangen         |
  Informatik VII                 |
  Martensstr. 3                  |
  D-8520 Erlangen                |