Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!mit-eddie!uw-beaver!tektronix!reed!omen!caf
From: caf@omen.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Re: More Procomm Problems
Message-ID: <607@omen.UUCP>
Date: Thu, 22-Oct-87 18:11:53 EST
Article-I.D.: omen.607
Posted: Thu Oct 22 18:11:53 1987
Date-Received: Sun, 25-Oct-87 06:11:37 EST
References: <1745@gryphon.CTS.COM> <4330007@hpindda.HP.COM>
Reply-To: caf@omen.UUCP (Chuck Forsberg WA7KGX)
Organization: Omen Technology Inc, Portland Oregon
Lines: 13

In article <4330007@hpindda.HP.COM> hardin@hpindda.HP.COM (John Hardin) writes:
:a tad.  QMODEM seems to have some interesting features (e.g.,
:43 line mode and external protocols) but I haven't gotten them
:to work well for me yet.  If this doesn't improve soon, PROCOMM
:will get my vote.

ZCOMM and Pro-YAM will work in 43 lines mode, 114x60, or 100x75 if your
EGA Bios can set the mode.  Of course, 100x75 is a bit hard to read on a
14 inch monitor, but ZCOMM handles it fine.

Note: ZCOMM in 29, 43, 44, 60, 66, or 75 line mode will not pass VTTEST
because VTTEST is hard wired to 24 lines.  But at least it passs it in
25 line mode.  It also works with "aggressive" vt100 termcaps.