Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!amdcad!ames!ptsfa!pbhyc!jdf
From: jdf@pbhyc.UUCP (Jack Fine)
Newsgroups: comp.sys.ibm.pc,comp.sys.apple
Subject: quadlink board
Message-ID: <841@pbhyc.UUCP>
Date: Fri, 23-Oct-87 00:32:43 EST
Article-I.D.: pbhyc.841
Posted: Fri Oct 23 00:32:43 1987
Date-Received: Sun, 25-Oct-87 13:22:28 EST
Organization: Pacific * Bell, Sacramento, CA
Lines: 17
Xref: mnetor comp.sys.ibm.pc:9345 comp.sys.apple:3053




I am posting the following for someone that does not have net access.  You
can respond to me via mail and I will forward.  Thanks for any help.

Jack

 From: MICHAEL HUTTINGER
   Re: QUADLINK BOARD

I have a quadlink board for the IBM PC and was wondering if anyone else 
is using one. It allows running Apple 2 programs on an IBM PC using the 
same drives as the ones on the IBM. Does anyone know of a modem program 
that will work with this board? The I/O to the printer works fine. Also, 
Ive noticed only Tandon disk drives work well with the IBM running in 
Apple mode. Is there another brand that will work as well? Thanks.