Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!sdcsvax!ucsdhub!hp-sdd!hplabs!well!mandel
From: mandel@well.UUCP (Tom Mandel)
Newsgroups: comp.sys.ibm.pc
Subject: KERMIT 2.29 problem
Message-ID: <4308@well.UUCP>
Date: Mon, 26-Oct-87 19:01:09 EST
Article-I.D.: well.4308
Posted: Mon Oct 26 19:01:09 1987
Date-Received: Thu, 29-Oct-87 19:51:01 EST
Lines: 28
Keywords: KERMIT 2.29, Everex 1200 baud modem, AT clones


I am having this curious problem getting MSKERMIT Version 2.29
to work at all on my two AT clones.  The equipment is as
follows:

(1)	Samsung S-286, with Everex 920 300/1200 baud modem,
	running under PC-DOS 3.2.

(2)	Wyse pc286, also with an Everex 920 modem, and running
	under MS-DOS 3.1.

The problem is that when I run MSKERMIT and try to connect to
the modem (on either machine), I am unable to wake up the
modem at all.  COM ports, speeds, parity, and so on are all
set correctly.  I have fiddled around with MSKERMIT's local
echo on/off, but that seems to make no difference.

I suspect some sort of mismatch between MSKERMIT 2.29 and
the Everex modems, since the other telecomm software I have
available (Framework II, Bitcom, and KERMIT-MS 2.27) all
behave properly.

Has anybody run into anything similar, and are there any
suggested fixes, or...?

Thanks,

--Tom Mandel	mandel@kl.sri.com	well!mandel