Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!uunet!mcvax!nikhefk!keeshu From: keeshu@nikhefk.UUCP (Kees Huyser) Newsgroups: comp.sys.mac Subject: Re: cleaning mmouses (mice) Message-ID: <260@nikhefk.UUCP> Date: Fri, 16-Oct-87 08:45:35 EDT Article-I.D.: nikhefk.260 Posted: Fri Oct 16 08:45:35 1987 Date-Received: Sat, 17-Oct-87 21:34:02 EDT References: <30989@sun.uucp> Reply-To: keeshu@nikhefk.UUCP (Kees Huyser) Organization: National Institute for Nuclear Physics; Netherlands Lines: 32 Keywords: clean mice In article <30989@sun.uucp> mlwh%sphinx@Sun.COM (Martin Hall) writes: |What is the best way to clean the mice that come with the new Mac SEs |----Martin L. W. Hall---- Sun Microsystems |HASA member {allegra | hplabs}!sun!mlwh@sphinx or mlwh@sun.COM The stuff I use to clean the mice at work is RealClean, it is manufactured by Tacklind Design, Inc. 250 Cowper Street, Palo Alto, CA 94301 The cleaning kit consists of a plastic tweezer to pick the lint off the roller shafts, a flywheel-on-a-stick-with-a-rough-edge sort of tool (I don't know a better description, in the kit they call it "the tool") and a bottle of cleaning solution ( 91% isopropyl alcohol, 9% water). You put a few drops of the alcohol on the tool, insert it in the cavity which holds the roller ball, and twist it around a few times. This usually takes all the junk off the rollers. -- Kees Standard Disclaimer: I have no connections with Tacklind Design, other than as a satisfied customer. | UUCP : keeshu@nikhefk.uucp or {[wherever]!uunet}!mcvax!nikhefk!keeshu | BITNET : keeshu@hasara5.bitnet | FIDO : 2:508/15 (Opus_MacSaga) or 2:500/11 (HCC_Amsterdam_1) | SNAIL : kees huyser, NIKHEF-K, PO Box 4395, 1009 AJ Amsterdam, Netherlands |-----------------------------------------------------------------------------