Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!uw-beaver!fluke!markus
From: markus@tc.fluke.COM (Mark Hastings)
Newsgroups: comp.sys.mac
Subject: Engineering Applications
Message-ID: <2041@sputnik.COM>
Date: Mon, 19-Oct-87 11:31:28 EDT
Article-I.D.: sputnik.2041
Posted: Mon Oct 19 11:31:28 1987
Date-Received: Tue, 20-Oct-87 04:41:19 EDT
Sender: news@tc.fluke.COM
Lines: 29
Keywords: Spice, Applications, Layout




I'm looking for two programs to run on a Mac+ and maybe a Mac II.

   1. Schematic Capture 
	Should be able to do rubber banding and create parts/libraries.
	(Analog and digital components.)

   2. Spice
	The closest thing I've seen to a spice program is Design Scope.
	It looks like a good program, but I would like to use real
	components after I am done with Design Scope.

If anyone has any experience with any of the above type programs, please
let me know what you think about them. 

Thanks,
Mark

____________________________________________________________
Mark Hastings                  {decvax,ihnp4}!uw-beaver!--\
John Fluke Mfg. Co., Inc.                 {sun,allegra}!---> fluke!markus
(206) 356-6275                 {ucbvax,hplabs}!lbl-csam!--/
-- 
____________________________________________________________
Mark Hastings                  {decvax,ihnp4}!uw-beaver!--\
John Fluke Mfg. Co., Inc.                 {sun,allegra}!---> fluke!markus
(206) 356-6275                 {ucbvax,hplabs}!lbl-csam!--/