Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!sundc!sun!amdcad!ames!hc!beta!cmcl2!rutgers!bellcore!faline!ulysses!sfmag!sfsup!shap
From: shap@sfsup.UUCP (J.S.Shapiro)
Newsgroups: comp.sys.mac
Subject: Re: Mac II Displays
Message-ID: <2224@sfsup.UUCP>
Date: Tue, 20-Oct-87 00:19:53 EDT
Article-I.D.: sfsup.2224
Posted: Tue Oct 20 00:19:53 1987
Date-Received: Wed, 21-Oct-87 07:15:52 EDT
References: <76000028@uiucdcsp> <1325@thebes.swatsun.UUCP>
Organization: AT&T-IS, Summit N.J. USA
Lines: 11
Summary: You can use the MultiSync

In article <1325@thebes.swatsun.UUCP>, jeremy@swatsun.UUCP writes:
> When I first got my Mac II, I tried several cables hooking it
> up to a MultiSync, none of which worked.

There are two tricks to it. The first is to use the cable documented i
APples documentation. The second is to tell the monitor about the right way
to synchronize. I have forgotten the details on both, but I hope someone
out there can refresh both our memories.

Jonathan S. Shapiro
AT&T