Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!husc8!seung
From: seung@husc8.HARVARD.EDU (Seung)
Newsgroups: comp.sys.mac
Subject: printing PostScript generated by Mac
Message-ID: <3056@husc6.UUCP>
Date: Tue, 27-Oct-87 16:50:16 EST
Article-I.D.: husc6.3056
Posted: Tue Oct 27 16:50:16 1987
Date-Received: Fri, 30-Oct-87 03:39:49 EST
Sender: news@husc6.UUCP
Reply-To: seung@husc8.UUCP (Seung)
Organization: Harvard Univ. Science Center
Lines: 13

I am working on an Apollo DN3000 running DOMAIN/IX.  Connected to
it is an Apple LaserWriter.  Since I also have a Mac at home, I
would like to be able to upload PostScript files to the Apollo
and print them out on the LaserWriter.  What I have been doing is
using the command-K trick to generate a file which includes
LaserPrep as a header, followed by my print file.  I then transfer
this file to the Apollo, and feed it to the LaserWriter.  The
yellow light flashes, indicating that some processing is going on,
but no page is ever printed.  Does anyone know what I might be
doing wrong?  Please answer by mail and I will summarize to the net.
Thanks in advance.

Sebastian Seung