Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!decwrl!hplabs!sri-unix!husc6!endor!singer
From: singer@endor.harvard.edu (Richard Siegel)
Newsgroups: comp.sys.mac
Subject: Re: Mac+ Memory prob. w/LSC
Message-ID: <3087@husc6.UUCP>
Date: Mon, 2-Nov-87 09:55:08 EST
Article-I.D.: husc6.3087
Posted: Mon Nov  2 09:55:08 1987
Date-Received: Thu, 5-Nov-87 23:51:00 EST
References: <1918@uwmacc.UUCP> <2503@cbdkc1.ATT.COM>
Sender: news@husc6.UUCP
Reply-To: singer@endor.UUCP (Richard Siegel)
Organization: THINK Technologies, Inc., Bedford, MA
Lines: 22

In article <2503@cbdkc1.ATT.COM> joe@cbdkc1.UUCP (Joseph T. Judge) writes:
>
>I have been using LightSpeed C, with the shareware RamStart and after a
>couple of months now, it decided to staop working!!
>
	From what you described, you're running out of memory, pure
and simple. For one thing, it's not necessary to have a cache *and* a
RAM disk; get rid of one or the other; you could conceivably put all
of your include files on the RAM disk.

	The other thing is to check the setting of the "More Memory" switch
in the "Options..." dialog box (under the Edit menu). Be sure that it's
set.

		--Rich

**The opinions stated herein are my own opinions and do not necessarily
represent the policies or opinions of my employer (THINK Technologies, Inc).

* Richard M. Siegel | {decvax, ucbvax, sun}!harvard!endor!singer    *
* Customer Support  | singer@endor.harvard.edu			    *
* Symantec, THINK Technologies Division.  (No snappy quote)         *