Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!decwrl!hplabs!gatech!pyr!jm7
From: jm7@pyr.gatech.EDU (John McLeod)
Newsgroups: comp.sys.zenith.z100
Subject: Re: BBSs Supporting Z100s? (Asking again)
Message-ID: <4342@pyr.gatech.EDU>
Date: Sun, 1-Nov-87 00:34:45 EST
Article-I.D.: pyr.4342
Posted: Sun Nov  1 00:34:45 1987
Date-Received: Thu, 5-Nov-87 19:51:56 EST
References: <2499@cbdkc1.ATT.COM>
Reply-To: jm7@pyr.UUCP (John McLeod)
Organization: Georgia Institute of Technology
Lines: 26

In article <2499@cbdkc1.ATT.COM> pmd@cbdkc1.UUCP (Paul Dubuc) writes:
>
>A few weeks ago I posted a query regarding info on any BBSs that
>support public domain software for z100s.  The only response I
>got was from someone asking me to post any info that I gained.
>Did I really ask in vain?
>
>-- 
>
>Paul Dubuc	{ihnp4,cbosgd}!cbdkc1!pmd

I suppose that everyone else thought that someone else would do this.  I only
have two bulletin boards that I know about that try to support the z-100.  

The first is run by the local zenith dealer, even though he no longer sells or
supports the z-100 himself, the board does have some software.  The number is
404-252-4345.

The other is the HUG bulletin board advertised in REMARK.  Its number is:
616-982-3956.  Due to long distance charges, I have not been on in a long time.

One other that did support the z-100 at least the last time that I was on was
BIX, which is advertised in BYTE.  I do not have a number for this, as it is 
reached through tymenet.

jm7