Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!lll-winken!lll-lcc!pyramid!csg
From: csg@pyramid.pyramid.com (Carl S. Gutekunst)
Newsgroups: comp.terminals
Subject: Re: 4.3 Support for ATT 630 MTG (the "new" DMD terminal)
Message-ID: <8798@pyramid.pyramid.com>
Date: Fri, 23-Oct-87 13:40:53 EST
Article-I.D.: pyramid.8798
Posted: Fri Oct 23 13:40:53 1987
Date-Received: Sun, 25-Oct-87 16:37:38 EST
References: <955@sdcc7.ucsd.EDU>
Organization: Pyramid Technology Corp., Mountain View, CA
Lines: 15
Keywords: blit, dmd, 5620, 630 MTG

In article <955@sdcc7.ucsd.EDU> muller@sdcc7.ucsd.EDU (Keith Muller) writes:
>The first one will will require NO kernel changes and will run on generic
>4.3 machines (machines that have the 4.3 tty_pty.c that is). This will
>be ready in November. The second version will have a kernel driver (there is no
>date for the second one yet).

Pyramid Technology supports the 615, 620, and 630 now. Celerity has supported
the old 5620 for some time, so I would expect the new terminals to work just
fine on their systems as well. (You can use a VT-220 termcap for the 615 and
620, and the 5620 termcap on the 630. An AT&T 4410 termcap needs some hacking
before it'll work on a 615 or 620.)

And I believe BRL's user-mode DMD multiplexor for 4.2BSD should work OK, too. 
(That puppy is free, isn't it Doug?)

<csg>